Deplasto

Limited Time: Free Shipping + Free eBook + Money-Back Guarantee 

Do Plastic Cutting Boards Release Microplastics? What the Studies Show

Yes, lab tests show that plastic cutting boards release microplastics. In a 2025 study by Gan and colleagues, scientists cut mouse feed on new polypropylene and polyethylene boards, and microplastics from the boards ended up in the feed. [1] However, the study didn’t measure how many microplastics people actually swallow from preparing foods on cutting boards. [1]

Key numbers: microplastics from plastic cutting boards

Finding Number Study type Source
Weight of microplastics released per cut by a new polypropylene (PP) board and a new polyethylene (PE) board About 0.106 mg (PP) and 0.078 mg (PE) Lab test, mouse feed cut on the boards Gan 2025 [1]
Weight of microplastics released per cut in the 12th round of cutting on the same boards 0.249 mg (PP) and 0.277 mg (PE) Lab test, mouse feed cut on the boards Gan 2025 [1]
Total weight of microplastics released over all 12 rounds 1.28 g (PP) and 1.42 g (PE) Lab test, mouse feed cut on the boards Gan 2025 [1]
Average size of the microplastics released 10.4 µm (PP) and 27.4 µm (PE) Lab test, mouse feed cut on the boards Gan 2025 [1]
Microplastics in feed cut on new willow wood boards None found Lab test, mouse feed cut on the boards Gan 2025 [1]

How many microplastics do plastic cutting boards release?

In the Gan study, a new plastic cutting board released an average of about 0.08 to 0.11 mg of microplastics per cut. [1]

The researchers spread a paste of mouse feed on each board and cut it 700 times with a steel kitchen knife. [1] They chose 700 cuts to match about a week of cutting in a home kitchen. [1] They repeated this 12 times on the same boards. [1]

On new boards, polypropylene released about 0.106 mg of microplastics per cut. [1] Polyethylene released about 0.078 mg per cut. [1] Over all 12 rounds, the polypropylene boards released 1.28 g of microplastics and the polyethylene boards released 1.42 g. [1]

The researchers weighed the microplastics but did not count them. [1] They also measured each microplastic’s narrowest width. The average was 10.4 µm for polypropylene and 27.4 µm for polyethylene. [1] A µm is a thousandth of a millimeter.

A 2023 study by Yadav and colleagues also found that chopping on plastic boards released microplastics. [2] In that study, polypropylene boards released 5% to 60% more microplastics by weight than polyethylene boards. [2] They also released 14% to 71% more microplastics by count. [2]

Cutting boards are one of several plastic sources in the kitchen. See our posts on microplastics from non-stick pans and microwaving plastic containers, and our guide to microplastics in food.

Do older plastic cutting boards release more microplastics?

Possibly. In the Gan study, release per cut was higher by the 12th round of use, but the boards started out new.

In the Gan study, the microplastics in the feed rose as the same boards were used for 12 weekly rounds. [1] By the 12th round, polypropylene released 0.249 mg per cut and polyethylene released 0.277 mg per cut. [1] From this, the authors say older boards may be more prone to releasing microplastics. [1] The study did not test boards that were already old. [1]

What you cut may also matter. In the Yadav study, chopping carrots on polyethylene boards was linked to more microplastics than chopping without carrots. [2] For meat, see our post on microplastics in meat.

Do wooden cutting boards release microplastics?

In the Gan study, mouse feed cut on wooden boards had no microplastics in it. [1]

The boards were made of willow. [1] So switching to a wooden board is a reasonable way to cut down on microplastics from your cutting board. [1] The study didn’t check whether wooden boards shed small bits of wood into food. [1] We found no studies on bamboo or glass boards.

What happened to mice that ate microplastics from cutting boards?

In the Gan study, mice that ate feed cut on plastic boards for 12 weeks showed changes in their gut. [1]

The study used 36 female mice in three groups. [1] One group ate feed cut on polypropylene boards, one ate feed cut on polyethylene boards and one ate feed cut on willow boards. [1] The researchers analyzed 6 mice per group at the 12-week mark. [1] All three groups ate about the same amount and gained about the same weight. [1]

In the 12-week mouse test, mice in the polypropylene group had more signs of inflammation in their blood and gut than mice in the willow group. [1] Mice in the polyethylene group showed no clear inflammation. [1] In the polyethylene group, gut bacteria changed, and so did certain chemicals in the stool and liver. [1]

The researchers did not detect microplastics in the mice’s liver or gut tissue. [1] The authors note that the mice got relatively high doses. [1]

What we don’t know yet about plastic cutting boards and microplastics

  • How much people swallow. The Gan study did not measure how many microplastics a person takes in from a cutting board. It also cannot show effects on human health. [1]
  • Real meals. The main study cut mouse feed paste on new boards. It did not test meat, vegetables or bread. [1]
  • Lower doses over years. The mice got relatively high doses for 12 weeks. The authors call for studies of lower doses over longer periods. [1]
  • Old boards. The rise in release was measured on new boards over 12 rounds. Gan did not test boards that were already old. [1]
  • Other board materials. The only wooden boards tested were willow, and the researchers only looked for plastic. [1] We found no studies on bamboo or glass boards.

How to reduce your exposure to microplastics from plastic cutting boards

1. Swap your plastic board for a wooden one. In the Gan study, mouse feed cut on wooden boards had no microplastics in it. [1] The authors recommend using plastic cutting boards less. [1]

2. Replace plastic cutting boards regularly. The Gan authors advise replacing plastic boards regularly if you keep using them. [1] They base this on the rise in microplastics in the feed as the boards were used. [1]

For more steps across your whole home, see how to avoid microplastics. To see where your microplastic intake comes from across foods, drinks and household items, try the Deplasto microplastic tracking app. The Deplasto supplement is designed to support the body’s natural detoxification pathways.

FAQ

Do plastic cutting boards release microplastics into food?

Yes. In a 2025 lab study, new plastic cutting boards released an average of about 0.08 to 0.11 mg of microplastics per cut into mouse feed. [1]

Do polypropylene or polyethylene cutting boards release more microplastics?

It depends on the study. In the Yadav study, polypropylene boards released more microplastics by weight and by count. [2] In the Gan study, a new polypropylene board released more per cut (0.106 mg vs 0.078 mg). [1] By the 12th round, polyethylene released more per cut (0.277 mg vs 0.249 mg). [1] Polyethylene’s 12-round total was also higher (1.42 g vs 1.28 g). [1]

Do wooden cutting boards release microplastics?

In a 2025 lab study, mouse feed cut on wooden boards had no microplastics in it. [1] The researchers didn’t check whether the wooden boards shed bits of wood into the feed. [1]

How often should I replace a plastic cutting board to limit microplastics?

The Gan study gives no set schedule. Its authors advise replacing plastic boards regularly, because boards released more microplastics per cut as they were used. [1]

Are microplastics from cutting boards harmful?

No one knows yet for people. In a 2025 study, mice that ate relatively high doses of cutting board microplastics had gut changes, but they ate and grew normally. [1]

Sources

Studies marked “summary only” are ones we could read only in summary (abstract) form.

  1. Gan HJ, Chen S, Yao K, Lin XY, Juhasz AL, Zhou D, Li HB (2025). Simulated Microplastic Release from Cutting Boards and Evaluation of Intestinal Inflammation and Gut Microbiota in Mice. Environmental Health Perspectives, 133(3-4), 047004. https://doi.org/10.1289/EHP15472
  2. Yadav H, Khan MRH, Quadir M, Rusch KA, Mondal PP, Orr M, Xu EG, Iskander SM (2023). Cutting Boards: An Overlooked Source of Microplastics in Human Food? Environmental Science & Technology, 57(22), 8225-8235. (summary only) https://doi.org/10.1021/acs.est.3c00924

By Deplasto Research Team. Last updated: November 20, 2026.

20%

Off for your first order

Share your email for a one-time discount and get one step closer to a plastic-free lifestyle with Deplasto

One email. No spam — unsubscribe anytime.

microplastics in sea food. fish filet.

Are There Microplastics in Seafood? What Studies Found in Fish and Shellfish

Yes, there are microplastics in seafood. In a 2023 study by Dambrosio and colleagues, mussels bought from fish shops in Italy contained about 6.5 microplastics…

Read More »

Leave a Comment